Fuel injectors
  1. Home
  2. injection
  3. #1014310430

101431-0430 ZEXEL 9 400 610 498 BOSCH INJECTION-PUMP ASSEMBLY 9400610498 1014310430 5156007171


101431-0430 INJECTION-PUMP ASSEMBLY
Rating:
68
Buy INJECTION-PUMP ASSEMBLY 101431-0430 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 498 9400610498
ZEXEL 101431-0430 1014310430
ISUZU 5156007171 5156007171

Service parts 101431-0430 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101043-9200
3. GOVERNOR 105520-3100
4. SUPPLY PUMP 105220-4742
5. AUTOM. ADVANCE MECHANIS 105621-0310
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-1430
11. Nozzle and Holder 5-15300-016-0
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER
14. NOZZLE 105000-1650
15. NOZZLE SET

Include in #1:

101431-0430 as INJECTION-PUMP ASSEMBLY
106679-4162 as _

Cross reference number

BOSCH 9 400 610 498 9400610498
ZEXEL 101431-0430 1014310430
ISUZU 5156007171 5156007171


Zexel num
Bosch num
Firm num
Name
101431-0430 
101431-0450 
9 400 610 498 
5156007171  ISUZU
INJECTION-PUMP ASSEMBLY
C240 * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-3-4-2
Pre-stroke mm   2.25 2.2 2.3
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.4
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   33 31.4 34.6
Max. variation between cylinders %   0 -4 4
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   11.8
Pump speed r/min   1450 1450 1450
Average injection quantity mm3/st.   36.5 35.5 37.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   -
Rack position   8.8+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   7 5.9 8.1
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Timer adjustment
Pump speed r/min   500+-50
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   800
Advance angle deg.   1 0.5 1.5
Timer adjustment_03
Pump speed r/min   1050
Advance angle deg.   2 1.2 2.7
Timer adjustment_04
Pump speed r/min   1500
Advance angle deg.   4.5 3.9 4.9
Timer adjustment_05
Pump speed r/min   1750
Advance angle deg.   6 5.5 6.5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 101431-0430
R:Rack position (mm) P:Negative pressure (1)Pneumatic governor (2)Torque control stroke (3)Beginning of idle sub spring operation: L1
----------
L1=6.5-0.5mm
----------




Have questions with 101431-0430?





Group cross 101431-0430 ZEXEL

Isuzu 

101431-0400  

101431-0650 
 
5156007541 
INJECTION-PUMP ASSEMBLY
C240
101431-0410  

101431-0681 
 
5156007591 
INJECTION-PUMP ASSEMBLY
C240
101431-0420  
 
5156007601 

C240
101431-0430  

101431-0450 
9 400 610 498 
5156007171 
INJECTION-PUMP ASSEMBLY
C240
101431-0440  
 
5156007181 
INJECTION-PUMP ASSEMBLY
C240
101431-0450  
 
5156007501 
INJECTION-PUMP ASSEMBLY
C240
101431-0460  

101431-0640 
 
5156007531 
INJECTION-PUMP ASSEMBLY
C240
101431-0470  
 
5156008611 
INJECTION-PUMP ASSEMBLY
C240
101431-0480  

101431-0690 
 
5156007620 

C240
101431-0490  
 
5156008992 
INJECTION-PUMP ASSEMBLY
C240
Back to top