Fuel injectors
  1. Home
  2. injection
  3. #1014309000

101430-9000 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014309000 131016141


101430-9000 INJECTION-PUMP ASSEMBLY
Rating:
29
Buy INJECTION-PUMP ASSEMBLY 101430-9000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101430-9000 1014309000
ISHIKAWAJIMA-S 131016141 131016141

Service parts 101430-9000 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP
3. GOVERNOR 105410-2330
4. SUPPLY PUMP
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-1792
11. Nozzle and Holder 13140 60 62
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105071-0542
14. NOZZLE 105000-1600
15. NOZZLE SET

Include in #1:

101430-9000 as INJECTION-PUMP ASSEMBLY
106671-2475 as _

Cross reference number

ZEXEL 101430-9000 1014309000
ISHIKAWAJIMA-S 131016141 131016141


Zexel num
Bosch num
Firm num
Name
101430-9000 
 
131016141  ISHIKAWAJIMA-S
INJECTION-PUMP ASSEMBLY
LEM754 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-3-4-2
Pre-stroke mm   1.75 1.7 1.8
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.5
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   30 29 31
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.3+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   7 6 8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   10.6+-0. 5
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   31 30.5 31.5
Fixing the lever   *

Test data Ex:

Governor adjustment

Test data 101430-9000
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Torque control stroke: L1 (N = N1 and N = N2 rack difference). (3)RACK LIMIT: RAL (4)Torque control stroke
----------
K=8 L1=1+0.1mm N1=1000r/min N2=1200r/min RAL=16.5+-1mm
----------

Speed control lever angle

Test data 101430-9000
F:Full speed I:Idle S:Stop
----------

----------
a=15deg+-5deg b=33deg+-5deg c=32deg+-3deg




Have questions with 101430-9000?





Group cross 101430-9000 ZEXEL

Ishikawajima-S 

101430-9000  
 
131016141 
INJECTION-PUMP ASSEMBLY
LEM754
101430-9010  
 
131016160 

LEM854
Back to top