101421-7050 ZEXEL 9 400 619 792 BOSCH INJECTION-PUMP ASSEMBLY 9400619792 1014217050 5156012401


101421-7050 INJECTION-PUMP ASSEMBLY
Rating:
10
Buy INJECTION-PUMP ASSEMBLY 101421-7050 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 792 9400619792
ZEXEL 101421-7050 1014217050
ISUZU 5156012401 5156012401

Service parts 101421-7050 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101042-9760
3. GOVERNOR 105542-3560
4. SUPPLY PUMP 105220-4741
5. AUTOM. ADVANCE MECHANIS 105621-0320
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-1491
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105081-3171
14. NOZZLE 105000-1650
15. NOZZLE SET

Include in #1:

101421-7050 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 619 792 9400619792
ZEXEL 101421-7050 1014217050
ISUZU 5156012401 5156012401


Zexel num
Bosch num
Firm num
Name
101421-7050 
9 400 619 792 
5156012401  ISUZU
INJECTION-PUMP ASSEMBLY
C190 * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-3-4-2
Pre-stroke mm   1.75 1.7 1.8
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.7
Pump speed r/min   1800 1800 1800
Average injection quantity mm3/st.   37 36.1 37.9
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.2+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   7 5.9 8.1
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   52 52
Fixing the rack   *
Remarks
Excess fuel for starting.
 
Injection quantity adjustment_04
Adjusting point   -
Rack position   -
Pump speed r/min   1800 1800 1800
Average injection quantity mm3/st.   37 36.5 37.5
Remarks
Smoke setting: 4.41 kPa {450 mmAq}
 
Timer adjustment
Pump speed r/min   800+-50
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1100
Advance angle deg.   1.7 1.2 2.2
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   4 3.3 4.7
Timer adjustment_04
Pump speed r/min   1900
Advance angle deg.   5.3 4.6 6
Timer adjustment_05
Pump speed r/min   2250
Advance angle deg.   6.5 6 7
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101421-7050
N:Pump speed R:Rack position (mm) P:Negative pressure (1)Pneumatic governor (2)Mechanical governor (3)Acting negative pressure: P1 (4)Beginning of idle sub spring operation: L1 (5)Injection quantity Q = Q1 or less
----------
L1=7.2+-0.1mm Q1=3mm3/st
----------

0000001501 ACS

Test data 101421-7050
(N): Speed of the pump (P): governor's negative pressure (R) Rack position (mm) Aneroid compensator adjustment (1)Screw in the aneroid compensator body to obtain the performance shown in the graph above.
----------

----------
N=1100r/min P=1.96kPa(200mmAq) Ra=12-0.1mm Rb=- Rc=10.9+-0.2mm P1=9.3--kPa(70--mmHg) P2=21.9kPa(164mmHg)

Timing setting

Test data 101421-7050
(1)Pump vertical direction (2)Gear mark Z for the No. 4 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=1.8deg
----------
a=(60deg)




Have questions with 101421-7050?





Group cross 101421-7050 ZEXEL

Isuzu 

F 01G 09U 01H 
5156011151 
INJECTION-PUMP ASSEMBLY
C190
 
5156011271 
INJECTION-PUMP ASSEMBLY
C190
 
5156011411 
INJECTION-PUMP ASSEMBLY
C190
9 400 614 082 
5156012481 
INJECTION-PUMP ASSEMBLY
C190
9 400 614 083 
5156012111 
INJECTION-PUMP ASSEMBLY
C190
101421-7050  
9 400 619 792 
5156012401 
INJECTION-PUMP ASSEMBLY
C190
9 400 614 084 
 
INJECTION-PUMP ASSEMBLY
C190
9 400 614 085 
 
INJECTION-PUMP ASSEMBLY
C190
 
8944080810 
INJECTION-PUMP ASSEMBLY
C190
Back to top