101403-9190 ZEXEL 9 400 611 248 BOSCH INJECTION-PUMP ASSEMBLY 9400611248 1014039190

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101403-9190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 248 9400611248

ZEXEL 101403-9190 1014039190

Service parts 101403-9190 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101041-9330

3. GOVERNOR 105922-0110

4. SUPPLY PUMP 105220-7060

5. AUTOM. ADVANCE MECHANIS 105671-0630

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-6170

11. Nozzle and Holder 16600-17D02

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105048-3691

14. NOZZLE 105017-2010

15. NOZZLE SET

Include in #1:

101403-9190 as INJECTION-PUMP ASSEMBLY

101605-9430 as _

Cross reference number

BOSCH 9 400 611 248 9400611248

ZEXEL 101403-9190 1014039190

Zexel num

Bosch num

Firm num

Name

101403-9190
101403-9191

9 400 611 248

INJECTION-PUMP ASSEMBLY
FD46T * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 134424-4120

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.2 3.15 3.25

Rack position
Point A R=A

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point -

Rack position 13.6

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 93.5 91.9 95.1

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.7+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 12 10.2 13.8

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(13.6)

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 93.5 92.5 94.5

Basic *

Fixing the lever *

Boost pressure kPa 69.3 69.3

Boost pressure mmHg 520 520

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.55

Pump speed r/min 1550 1550 1550

Average injection quantity mm3/st. 96.5 92.5 100.5

Fixing the lever *

Boost pressure kPa 69.3 69.3

Boost pressure mmHg 520 520

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position R2-1.15

Boost pressure kPa 18.7 17.4 20

Boost pressure mmHg 140 130 150

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position R2(R1-0. 15)

Boost pressure kPa 56 56 56

Boost pressure mmHg 420 420 420

Timer adjustment

Pump speed r/min 1200--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1150

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1490

Advance angle deg. 3.5 3 4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL
----------
T1=P15 BCL=1.15+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=32mm
----------
a=71deg+-5deg b=40deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=15mm
----------
a=10deg+-5deg b=29deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(50deg)