101402-9000 ZEXEL 9 400 611 936 BOSCH INJECTION-PUMP ASSEMBLY 9400611936 1014029000 12645051010

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101402-9000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 936 9400611936

ZEXEL 101402-9000 1014029000

YANMAR 12645051010 12645051010

Service parts 101402-9000 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101040-9070

3. GOVERNOR 105400-1140

4. SUPPLY PUMP 105220-4300

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2)

13. NOZZLE-HOLDER

14. NOZZLE

15. NOZZLE SET

Include in #1:

101402-9000 as INJECTION-PUMP ASSEMBLY

106679-4053 as _

Cross reference number

BOSCH 9 400 611 936 9400611936

ZEXEL 101402-9000 1014029000

YANMAR 12645051010 12645051010

Zexel num

Bosch num

Firm num

Name

101402-9000

9 400 611 936

12645051010 YANMAR

INJECTION-PUMP ASSEMBLY
4HAL K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-2-4-3

Pre-stroke mm 2.7 2.65 2.75

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cyl.1-2 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cal 1-3 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 12.8

Pump speed r/min 900 900 900

Each cylinder's injection qty mm3/st. 121 118.6 123.4

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 7.5+-0.5

Pump speed r/min 250 250 250

Each cylinder's injection qty mm3/st. 15 13.5 16.5

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)At rack cap installation: R1 or more (4)Main spring setting (5)Set idle sub-spring (6)Full speed setting
----------
K=7 R1=18mm
----------

Speed control lever angle

I:Idle (1)Set the pump speed at aa (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=755r/min bb=910r/min
----------
a=17deg+-5deg b=32deg+-5deg c=7deg+-3deg