101402-8100 ZEXEL 9 400 612 742 BOSCH INJECTION-PUMP ASSEMBLY 9400612742 1014028100 8973272420

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101402-8100 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 742 9400612742

ZEXEL 101402-8100 1014028100

ISUZU 8973272420 8973272420

Service parts 101402-8100 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101041-9700

3. GOVERNOR 105400-9490

4. SUPPLY PUMP 105220-6710

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156643-5220

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-8291

11. Nozzle and Holder 8-97327-244-0

12. Open Pre:MPa(Kqf/cm2) 19.1{195}/25.0{255}

13. NOZZLE-HOLDER 105048-2300

14. NOZZLE

15. NOZZLE SET 105019-1350

Include in #1:

101402-8100 as INJECTION-PUMP ASSEMBLY

106674-4066 as _

Cross reference number

BOSCH 9 400 612 742 9400612742

ZEXEL 101402-8100 1014028100

ISUZU 8973272420 8973272420

Zexel num

Bosch num

Firm num

Name

101402-8100

9 400 612 742

8973272420 ISUZU

INJECTION-PUMP ASSEMBLY
4JG1 K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-0820

Overflow valve opening pressure kPa 127 127 127

Overflow valve opening pressure kgf/cm2 1.3 1.3 1.3

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-3-4-2

Pre-stroke mm 2.6 2.55 2.65

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 9.3

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 65 64 66

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 6+-0.5

Pump speed r/min 585 585 585

Average injection quantity mm3/st. 12 10 14

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting (5)Rack difference between N = N1 and N = N2
----------
K=9 N1=1100r/min N2=900r/min
----------

Speed control lever angle

F:Full speed I:Idle S:Stop
----------

----------
a=2deg+-5deg b=19deg+-5deg c=31deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=0deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear mark 'W' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=11deg
----------
a=(210deg)