101402-7811 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014027811 8972541181


101402-7811 INJECTION-PUMP ASSEMBLY
Rating:
84
Buy INJECTION-PUMP ASSEMBLY 101402-7811 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101402-7811 1014027811
ISUZU 8972541181 8972541181

Service parts 101402-7811 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101041-8950
3. GOVERNOR 105411-2291
4. SUPPLY PUMP 105220-6670
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156643-4120
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-5120
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER 105030-4750
14. NOZZLE 105025-3030
15. NOZZLE SET

Include in #1:

101402-7811 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101402-7811 1014027811
ISUZU 8972541181 8972541181


Zexel num
Bosch num
Firm num
Name
101402-7811 
101402-7812 
 
8972541181  ISUZU
INJECTION-PUMP ASSEMBLY
4BG1-T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-4120
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   4.2 4.15 4.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   85.5 84.4 86.6
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   93.3 93.3
Boost pressure mmHg   700 700
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.7+-0.5
Pump speed r/min   475 475 475
Average injection quantity mm3/st.   8.8 7.4 10.2
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   E
Rack position   10.2++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   120 115 125
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   650 650 650
Rack position   8.7
Boost pressure kPa   40 36 44
Boost pressure mmHg   300 270 330
Boost compensator adjustment_02
Pump speed r/min   650 650 650
Rack position   9
Boost pressure kPa   80 73.3 86.7
Boost pressure mmHg   600 550 650

Test data Ex:

Governor adjustment

Test data 101402-7811
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Main spring setting (6)Set idle sub-spring (7)Rack difference between N = N1 and N = N2
----------
K=9 BCL=0.3+-0.1mm N1=1100r/min N2=650r/min
----------

Speed control lever angle

Test data 101402-7811
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=5deg+-5deg b=20deg+-5deg

Stop lever angle

Test data 101402-7811
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Normal stop (3)Stopper bolt setting (4)Stopper bolt setting (5)The stop lever does not have to return to the stop position (but set screw at rack position = cc). (6)-
----------
aa=0r/min bb=1-0.5mm cc=1-0.5mm
----------
a=10deg+-5deg b=(55deg)

0000001501 TAMPER PROOF

Test data 101402-7811
Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2 maximum)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

Test data 101402-7811
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=7deg
----------
a=(100deg)




Have questions with 101402-7811?





Group cross 101402-7811 ZEXEL

Isuzu 

 
8972541180 
INJECTION-PUMP ASSEMBLY
4BG1-T
101402-7811  

101402-7812 
 
8972541181 
INJECTION-PUMP ASSEMBLY
4BG1-T
F 019 Z10 722 
8972541182 
INJECTION-PUMP ASSEMBLY
4BG1-T
 
8972541183 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 612 411 
8972541184 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 612 780 
8972541185 
INJECTION-PUMP ASSEMBLY
4BG1-T
Back to top