101402-7731 ZEXEL 9 400 611 984 BOSCH INJECTION-PUMP ASSEMBLY 9400611984 1014027731 8972411633

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101402-7731 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 984 9400611984

ZEXEL 101402-7731 1014027731

ISUZU 8972411633 8972411633

Service parts 101402-7731 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101041-9520

3. GOVERNOR 105400-9210

4. SUPPLY PUMP 105220-5850

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156643-3820

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-6721

11. Nozzle and Holder 8-97211-280-0

12. Open Pre:MPa(Kqf/cm2) 18.1{185}

13. NOZZLE-HOLDER 105048-3230

14. NOZZLE

105017-2690

15. NOZZLE SET

Include in #1:

101402-7731 as INJECTION-PUMP ASSEMBLY

106679-4110 as _

Cross reference number

BOSCH 9 400 611 984 9400611984

ZEXEL 101402-7731 1014027731

ISUZU 8972411633 8972411633

Zexel num

Bosch num

Firm num

Name

101402-7731

9 400 611 984

8972411633 ISUZU

INJECTION-PUMP ASSEMBLY
4JG1 K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-0820

Overflow valve opening pressure kPa 127 107 147

Overflow valve opening pressure kgf/cm2 1.3 1.1 1.5

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-3-4-2

Pre-stroke mm 2.6 2.55 2.65

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 7.6

Pump speed r/min 1125 1125 1125

Average injection quantity mm3/st. 49 48 50

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 5.9+-0.5

Pump speed r/min 850 850 850

Average injection quantity mm3/st. 14.5 12.5 16.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting
----------
K=11
----------

Speed control lever angle

F:Full speed I:Idle S:Stop
----------

----------
a=6deg+-5deg b=11deg+-5deg c=35deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)No return spring
----------

----------
a=1.5deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear mark 'W' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(210deg)