101402-4000 ZEXEL 9 400 613 885 BOSCH INJECTION-PUMP ASSEMBLY 9400613885 1014024000 8943390710


101402-4000 INJECTION-PUMP ASSEMBLY
Rating:
24
Buy INJECTION-PUMP ASSEMBLY 101402-4000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 885 9400613885
ZEXEL 101402-4000 1014024000
ISUZU 8943390710 8943390710

Service parts 101402-4000 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101040-8720
3. GOVERNOR 105410-7650
4. SUPPLY PUMP 105220-4772
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156637-1521
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5053
11. Nozzle and Holder 1-15300-105-2
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-3201
14. NOZZLE 105015-4190
15. NOZZLE SET

Include in #1:

101402-4000 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 885 9400613885
ZEXEL 101402-4000 1014024000
ISUZU 8943390710 8943390710


Zexel num
Bosch num
Firm num
Name
101402-4000 
101402-4830 
9 400 613 885 
8943390710  ISUZU
INJECTION-PUMP ASSEMBLY
4BD1-T K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.9
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   74.2 72.2 76.2
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.1
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   71.8 70.3 73.3
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   -
Rack position   7.4+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   10.4 9 11.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101402-4000
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle sub spring setting: L1.
----------
K=13 L1=7.2+-0.1mm
----------

Speed control lever angle

Test data 101402-4000
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=25deg+-5deg

Stop lever angle

Test data 101402-4000
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 101402-4000
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(90deg)




Have questions with 101402-4000?





Group cross 101402-4000 ZEXEL

Isuzu 

101402-4000  

101402-4830 
9 400 613 885 
8943390710 
INJECTION-PUMP ASSEMBLY
4BD1-T
9 400 613 886 
8943440260 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 887 
894367517A 
INJECTION-PUMP ASSEMBLY
4BD1
 
8943675170 
INJECTION-PUMP ASSEMBLY
4BD1
 
8943679890 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 888 
8943718680 
INJECTION-PUMP ASSEMBLY
4BG1
 
8943745850 
INJECTION-PUMP ASSEMBLY
4BD1
F 019 Z20 437 
8943879110 
INJECTION-PUMP ASSEMBLY
4BG1
9 400 613 889 
8970180720 
INJECTION-PUMP ASSEMBLY
4BD1-T
9 400 610 453 
8970208800 
INJECTION-PUMP ASSEMBLY
4BD1-PY
Back to top