101402-1012 ZEXEL 9 400 613 845 BOSCH INJECTION-PUMP ASSEMBLY 9400613845 1014021012 me080748


101402-1012 INJECTION-PUMP ASSEMBLY
Rating:
41
Buy INJECTION-PUMP ASSEMBLY 101402-1012 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 845 9400613845
ZEXEL 101402-1012 1014021012
MITSUBISHI ME080748 me080748

Service parts 101402-1012 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101040-9930
3. GOVERNOR 105400-8560
4. SUPPLY PUMP 105220-5130
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156638-7320
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5830
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 17.7(180)
13. NOZZLE-HOLDER 105048-3501
14. NOZZLE 105017-1000
15. NOZZLE SET

Include in #1:

101402-1012 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 845 9400613845
ZEXEL 101402-1012 1014021012
MITSUBISHI ME080748 me080748


Zexel num
Bosch num
Firm num
Name
101402-1012 
9 400 613 845 
ME080748  MITSUBISHI
INJECTION-PUMP ASSEMBLY
4D34T K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-6220
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   70.5 69.5 71.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.7+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101402-1012
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT: RAL (4)Set at delivery (5)Rack difference between N = N1 and N = N2 (6)Set idle sub-spring
----------
K=11 RAL=13.3+-0.2mm N1=900r/min N2=260r/min
----------

Speed control lever angle

Test data 101402-1012
F:Full speed I:Idle (1)Pump speed = aa (2)Pump speed = bb (3)Stopper bolt setting (4)At delivery
----------
aa=750r/min bb=900r/min
----------
a=5deg+-5deg b=2deg+-5deg c=21deg+-5deg d=(2deg)

Stop lever angle

Test data 101402-1012
N:Pump normal S:Stop the pump. (1)No return spring
----------

----------
a=27deg+-5deg b=53deg+-5deg

Timing setting

Test data 101402-1012
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=10deg
----------
a=(130deg)




Have questions with 101402-1012?





Group cross 101402-1012 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 844 
ME080749 
INJECTION-PUMP ASSEMBLY
4D34T
F 019 Z10 569 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

101402-1012  
9 400 613 845 
ME080748 
INJECTION-PUMP ASSEMBLY
4D34T
9 400 610 436 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 240 
ME080996 
INJECTION-PUMP ASSEMBLY
4D34T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 738 
ME080895 
INJECTION-PUMP ASSEMBLY
4D34T
9 400 613 846 
ME217177 
INJECTION-PUMP ASSEMBLY
4D34TL
9 400 613 847 
ME217178 
INJECTION-PUMP ASSEMBLY
4D34TL
Back to top