101401-9820 ZEXEL F 01G 09U 01B BOSCH INJECTION-PUMP ASSEMBLY f01g09u01b 1014019820

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101401-9820 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09U 01B f01g09u01b

ZEXEL 101401-9820 1014019820

Include in #1:

101602-2990 as _

101602-2991

Cross reference number

BOSCH F 01G 09U 01B f01g09u01b

ZEXEL 101401-9820 1014019820

Zexel num

Bosch num

Firm num

Name

101401-9820
101401-9821

F 01G 09U 01B

INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 134424-4120

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.2 3.15 3.25

Rack position
Point A R=A

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point -

Rack position 13.6

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 91 89.4 92.6

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.7+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 11 9.2 12.8

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(13.6)

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 91 90 92

Basic *

Fixing the lever *

Boost pressure kPa 72 72

Boost pressure mmHg 540 540

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.95

Pump speed r/min 1550 1550 1550

Average injection quantity mm3/st. 108.5 104.5 112.5

Fixing the lever *

Boost pressure kPa 72 72

Boost pressure mmHg 540 540

Injection quantity adjustment_05

Adjusting point C

Rack position R2-1.2

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 60.5 56.5 64.5

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position R2-1.2

Boost pressure kPa 14.7 13.4 16

Boost pressure mmHg 110 100 120

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position R2[R1]

Boost pressure kPa 58.7 58.7 58.7

Boost pressure mmHg 440 440 440

Timer adjustment

Pump speed r/min 800--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 750

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1550

Advance angle deg. 6 5.5 6.5

Timer adjustment_04

Pump speed r/min -

Advance angle deg. 7 6.5 7.5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL
----------
T1=M32 BCL=1.2+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=32mm
----------
a=71deg+-5deg b=40deg+-3deg

Stop lever angle

N:Normal S:Stop (1)Use the pin at R = aa
----------
aa=12mm
----------
a=29deg+-5deg b=10deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=6deg
----------
a=(50deg)