101401-4020 ZEXEL 9 400 613 671 BOSCH INJECTION-PUMP ASSEMBLY 9400613671 1014014020 8970188263


101401-4020 INJECTION-PUMP ASSEMBLY
Rating:
72
Buy INJECTION-PUMP ASSEMBLY 101401-4020 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 671 9400613671
ZEXEL 101401-4020 1014014020
ISUZU 8970188263 8970188263

Service parts 101401-4020 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101040-8840
3. GOVERNOR 105931-7180
4. SUPPLY PUMP 105210-5070
5. AUTOM. ADVANCE MECHANIS 105676-5001
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5110
11. Nozzle and Holder 8-94388-787-0
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105048-3550
14. NOZZLE 105017-1130
15. NOZZLE SET

Include in #1:

101401-4020 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 671 9400613671
ZEXEL 101401-4020 1014014020
ISUZU 8970188263 8970188263


Zexel num
Bosch num
Firm num
Name
101401-4020 
101401-4080 
9 400 613 671 
8970188263  ISUZU
INJECTION-PUMP ASSEMBLY
4HF1 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8210
Nozzle   105780-0070
Bosch type code   DN12SD12T-1
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-3-4-2
Pre-stroke mm   3.9 3.85 3.95
Rack position
Point A
  R=A
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.8
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   72.8 71.2 74.4
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   8.4 7.1 9.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12.8)
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   72.8 71.8 73.8
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+0.5
Pump speed r/min   1600 1600 1600
Average injection quantity mm3/st.   88.5 84.5 92.5
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   80 80 112
Fixing the lever   *
Timer adjustment
Pump speed r/min   1375--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1325
Advance angle deg.   0.3
Timer adjustment_03
Pump speed r/min   1575
Advance angle deg.   5 4.5 5.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101401-4020
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm.
----------
T1=E87
----------

Speed control lever angle

Test data 101401-4020
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=40deg+-5deg b=(34deg)+-3deg

Stop lever angle

Test data 101401-4020
N:Pump normal S:Stop the pump. (1)Use the hole at R = aa
----------
aa=64mm
----------
a=20deg+-5deg b=29deg+-5deg

Timing setting

Test data 101401-4020
(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=11deg
----------
a=(60deg)




Have questions with 101401-4020?





Group cross 101401-4020 ZEXEL

Isuzu 

 
8970128730 
INJECTION-PUMP ASSEMBLY
4BG1
 
8970128731 
INJECTION-PUMP ASSEMBLY
4BG1
9 400 613 669 
8970128732 
INJECTION-PUMP ASSEMBLY
4BG1
9 400 613 670 
8943102103 
INJECTION-PUMP ASSEMBLY
4HF1
101401-4020  

101401-4080 
9 400 613 671 
8970188263 
INJECTION-PUMP ASSEMBLY
4HF1
9 400 613 672 
8943654353 
INJECTION-PUMP ASSEMBLY
4HF1
9 400 613 673 
8970186633 
INJECTION-PUMP ASSEMBLY
4HF1
9 400 613 674 
8970253251 
INJECTION-PUMP ASSEMBLY
4BD1
 
8970279941 
INJECTION-PUMP ASSEMBLY
4HF1
 
8970279951 
INJECTION-PUMP ASSEMBLY
4HF1
 
8970279961 
INJECTION-PUMP ASSEMBLY
4HF1
 
8970279971 
INJECTION-PUMP ASSEMBLY
4HF1
Back to top