101401-2375 ZEXEL 9 400 611 784 BOSCH INJECTION-PUMP ASSEMBLY 9400611784 1014012375 220205263a


101401-2375 INJECTION-PUMP ASSEMBLY
Rating:
44
Buy INJECTION-PUMP ASSEMBLY 101401-2375 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 784 9400611784
ZEXEL 101401-2375 1014012375
HINO 220205263A 220205263a

Service parts 101401-2375 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101041-9241
3. GOVERNOR 105401-1091
4. SUPPLY PUMP 105220-6580
5. AUTOM. ADVANCE MECHANIS 105676-1092
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-5250
11. Nozzle and Holder 23600-3180A
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105041-5190
14. NOZZLE 105015-6240
15. NOZZLE SET

Include in #1:

101401-2375 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 784 9400611784
ZEXEL 101401-2375 1014012375
HINO 220205263A 220205263a


Zexel num
Bosch num
Firm num
Name
101401-2375 
9 400 611 784 
220205263A  HINO
INJECTION-PUMP ASSEMBLY
W04C-TI K 14BD INJECTION PUMP ASSY PE4AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   4.3 4.27 4.33
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.75 90.25
Difference between angles 2
Cal 1-4
deg.   180 179.75 180.25
Difference between angles 3
Cyl.1-2
deg.   270 269.75 270.25
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   115 113 117
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   45.3 45.3
Boost pressure mmHg   340 340
Injection quantity adjustment_02
Adjusting point   C
Rack position   8.4+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   10 8.5 11.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   650 650 650
Rack position   R1-1.7
Boost pressure kPa   4 2.7 5.3
Boost pressure mmHg   30 20 40
Boost compensator adjustment_02
Pump speed r/min   650 650 650
Rack position   R1(11.5)
Boost pressure kPa   32 32 32
Boost pressure mmHg   240 240 240
Timer adjustment
Pump speed r/min   1300--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1250
Advance angle deg.   0.3
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   3 2.7 3.3
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101401-2375
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting (5)Boost compensator stroke: BCL
----------
K=9 BCL=1.7+-0.1mm
----------

Speed control lever angle

Test data 101401-2375
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=11deg+-5deg b=26deg+-5deg

Stop lever angle

Test data 101401-2375
N:Pump normal S:Stop the pump. (1)Normal (2)Pump speed aa and rack position bb (to be sealed at delivery) (3)Use the hole above R = cc
----------
aa=0r/min bb=1-0.5mm cc=25mm
----------
a=21deg+-5deg b=(55deg)

Timing setting

Test data 101401-2375
(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)




Have questions with 101401-2375?





Group cross 101401-2375 ZEXEL

Hino 

 
220205260A 
INJECTION-PUMP ASSEMBLY
W04C-TV
 
220205261A 
INJECTION-PUMP ASSEMBLY
W04C-TV
 
 
INJECTION-PUMP ASSEMBLY

Hino 

 
220205262A 
INJECTION-PUMP ASSEMBLY
W04C-TI
 
220205262B 
INJECTION-PUMP ASSEMBLY
W04C-TI
101401-2375  
9 400 611 784 
220205263A 
INJECTION-PUMP ASSEMBLY
W04C-TI
Back to top