101401-2333 ZEXEL 9 400 613 662 BOSCH INJECTION-PUMP ASSEMBLY 9400613662 1014012333 220204700c

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101401-2333 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 662 9400613662

ZEXEL 101401-2333 1014012333

HINO 220204700C 220204700c

Service parts 101401-2333 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101041-9241

3. GOVERNOR 105401-0820

4. SUPPLY PUMP 105220-5590

5. AUTOM. ADVANCE MECHANIS 105676-1052

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-5221

11. Nozzle and Holder 236002571A

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105041-5171

14. NOZZLE 105015-6240

15. NOZZLE SET

Include in #1:

101401-2333 as INJECTION-PUMP ASSEMBLY

101603-2450 as _

Cross reference number

BOSCH 9 400 613 662 9400613662

ZEXEL 101401-2333 1014012333

HINO 220204700C 220204700c

Zexel num

Bosch num

Firm num

Name

101401-2333
101401-2334

9 400 613 662

220204700C HINO

INJECTION-PUMP ASSEMBLY
W04C-TI * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 4.3 4.27 4.33

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.75 90.25

Difference between angles 2
Cal 1-4 deg. 180 179.75 180.25

Difference between angles 3
Cyl.1-2 deg. 270 269.75 270.25

Injection quantity adjustment

Adjusting point A

Rack position 11.5

Pump speed r/min 1500 1500 1500

Average injection quantity mm3/st. 115 113 117

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 45.3 45.3

Boost pressure mmHg 340 340

Injection quantity adjustment_02

Adjusting point C

Rack position 8.4+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 10 8.5 11.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 650 650 650

Rack position R1(11.5)

Boost pressure kPa 4 2.7 5.3

Boost pressure mmHg 30 20 40

Boost compensator adjustment_02

Pump speed r/min 650 650 650

Rack position R1-1.7

Boost pressure kPa 32 32 32

Boost pressure mmHg 240 240 240

Timer adjustment

Pump speed r/min 950--

Advance angle deg. 0 0 0

Load 1/4

Remarks
Start

Timer adjustment_02

Pump speed r/min 900

Advance angle deg. 0.3

Load 1/4

Timer adjustment_03

Pump speed r/min (1000)

Advance angle deg. 1.25 0.65 1.25

Load 4/4

Timer adjustment_04

Pump speed r/min 1200

Advance angle deg. 1.25 0.65 1.25

Load 3/4

Timer adjustment_05

Pump speed r/min 1500

Advance angle deg. 4.5 4.2 4.8

Load 4/4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting (5)Boost compensator stroke: BCL
----------
K=9 BCL=1.7+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=11deg+-5deg b=26deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Normal
----------
aa=0r/min bb=1-0.5mm
----------
a=21deg+-5deg b=(55deg)

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)