101401-2264 ZEXEL 9 400 612 740 BOSCH INJECTION-PUMP ASSEMBLY 9400612740 1014012264 220203692c


101401-2264 INJECTION-PUMP ASSEMBLY
Rating:
14
Buy INJECTION-PUMP ASSEMBLY 101401-2264 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 740 9400612740
ZEXEL 101401-2264 1014012264
HINO 220203692C 220203692c

Service parts 101401-2264 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101040-9831
3. GOVERNOR 105401-0521
4. SUPPLY PUMP 105220-5300
5. AUTOM. ADVANCE MECHANIS 105676-0741
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-4320
11. Nozzle and Holder 23600-1710
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105041-5041
14. NOZZLE 105015-6240
15. NOZZLE SET

Include in #1:

101401-2264 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 740 9400612740
ZEXEL 101401-2264 1014012264
HINO 220203692C 220203692c


Zexel num
Bosch num
Firm num
Name
101401-2264 
101401-2265 
9 400 612 740 
220203692C  HINO
INJECTION-PUMP ASSEMBLY
W04C-T * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.2 3.17 3.23
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.75 90.25
Difference between angles 2
Cal 1-4
deg.   180 179.75 180.25
Difference between angles 3
Cyl.1-2
deg.   270 269.75 270.25
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   83.5 81.5 85.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   50.7 50.7
Boost pressure mmHg   380 380
Injection quantity adjustment_02
Adjusting point   C
Rack position   7.9+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   8 6.5 9.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   650 650 650
Rack position   R1-1.2
Boost pressure kPa   13.3 10.6 16
Boost pressure mmHg   100 80 120
Boost compensator adjustment_02
Pump speed r/min   650 650 650
Rack position   R1(10.5)
Boost pressure kPa   37.3 37.3 37.3
Boost pressure mmHg   280 280 280
Timer adjustment
Pump speed r/min   1350--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1300
Advance angle deg.   0.3
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   2.5 2 3
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   3.5 3.5 3.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101401-2264
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Main spring setting (4)Set idle sub-spring (5)Boost compensator stroke (at N = N1)
----------
K=10 N1=650r/min
----------

Speed control lever angle

Test data 101401-2264
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(13deg)+-5deg b=(26deg)+-5deg

Stop lever angle

Test data 101401-2264
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Normal
----------
aa=0r/min bb=1-0.2mm
----------
a=21deg+-5deg b=(55deg)

Timing setting

Test data 101401-2264
(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)




Have questions with 101401-2264?





Group cross 101401-2264 ZEXEL

Hino 

 
220203690A 
INJECTION-PUMP ASSEMBLY
W04C-T
 
220203691A 
INJECTION-PUMP ASSEMBLY
W04C-T
 
220203691B 
INJECTION-PUMP ASSEMBLY
W04C-T
 
220203692B 
INJECTION-PUMP ASSEMBLY
W04C-T
101401-2264  

101401-2265 
9 400 612 740 
220203692C 
INJECTION-PUMP ASSEMBLY
W04C-T
F 019 Z10 925 
220203692D 
INJECTION-PUMP ASSEMBLY
W04C-T
Back to top