101401-1890 ZEXEL 9 400 612 098 BOSCH INJECTION-PUMP ASSEMBLY 9400612098 1014011890


101401-1890 INJECTION-PUMP ASSEMBLY
Rating:
10
Buy INJECTION-PUMP ASSEMBLY 101401-1890 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 098 9400612098
ZEXEL 101401-1890 1014011890

Service parts 101401-1890 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101041-9500
3. GOVERNOR 105400-9300
4. SUPPLY PUMP 105220-6400
5. AUTOM. ADVANCE MECHANIS 105676-1210
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5031
11. Nozzle and Holder ME016655
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105048-3590
14. NOZZLE 105017-1040
15. NOZZLE SET

Include in #1:

101401-1890 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 098 9400612098
ZEXEL 101401-1890 1014011890


Zexel num
Bosch num
Firm num
Name
101401-1890 
101401-1891 
9 400 612 098 
   
INJECTION-PUMP ASSEMBLY
4D34T * K 14BD PE4AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.3
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   90.5 89.5 91.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.8+-0.5
Pump speed r/min   475 475 475
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   C
Rack position   10.7++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   55 55 60
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2.5 2 3
Timer adjustment_02
Pump speed r/min   (630)
Advance angle deg.   2.5 2 3
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   720+-25
Advance angle deg.   0 0 0
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101401-1890
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Main spring setting (5)Set idle sub-spring
----------
K=11
----------

Speed control lever angle

Test data 101401-1890
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(6deg)+-5deg b=(18deg)+-5deg

Stop lever angle

Test data 101401-1890
N:Pump normal S:Stop the pump. (1)Normal (2)Use the hole at R = aa
----------
aa=30mm
----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101401-1890
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(130deg)




Have questions with 101401-1890?





Group cross 101401-1890 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 492 
ME215033 
INJECTION-PUMP ASSEMBLY
4D34T4
9 400 613 642 
ME217175 
INJECTION-PUMP ASSEMBLY
4D34T
9 400 611 933 
ME217148 
INJECTION-PUMP ASSEMBLY
4D34T
 
 
INJECTION-PUMP ASSEMBLY
4D34T

Mitsubishi 

9 400 613 422 
ME217163 
INJECTION-PUMP ASSEMBLY
4D34T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 643 
ME217181 
INJECTION-PUMP ASSEMBLY
4D34T
9 400 611 308 
 
INJECTION-PUMP ASSEMBLY
9 400 611 238 
 
INJECTION-PUMP ASSEMBLY
9 400 611 782 
 
INJECTION-PUMP ASSEMBLY
4D34T

Mitsubishi 

9 400 612 486 
ME217182 
INJECTION-PUMP ASSEMBLY
4D34T
9 400 611 373 
ME217232 
INJECTION-PUMP ASSEMBLY
4D34T
9 400 611 980 
ME217230 
INJECTION-PUMP ASSEMBLY
4D34T
9 400 613 644 
ME217121 
INJECTION-PUMP ASSEMBLY
4D34T
101401-1890  

101401-1891 
9 400 612 098 
 
INJECTION-PUMP ASSEMBLY
4D34T
9 400 612 798 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 037 
ME440014 
INJECTION-PUMP ASSEMBLY
4D34T
Back to top