101401-1780 ZEXEL 9 400 611 410 BOSCH INJECTION-PUMP ASSEMBLY 9400611410 1014011780 me011490

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101401-1780 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 410 9400611410

ZEXEL 101401-1780 1014011780

MITSUBISHI ME011490 me011490

Service parts 101401-1780 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101041-9390

3. GOVERNOR 105921-9630

4. SUPPLY PUMP 105220-7110

5. AUTOM. ADVANCE MECHANIS 105676-1100

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-4991

11. Nozzle and Holder ME016983

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105048-3501

14. NOZZLE

105017-1000

15. NOZZLE SET

Include in #1:

101401-1780 as INJECTION-PUMP ASSEMBLY

108822-3102 as _

Cross reference number

BOSCH 9 400 611 410 9400611410

ZEXEL 101401-1780 1014011780

MITSUBISHI ME011490 me011490

Zexel num

Bosch num

Firm num

Name

101401-1780

9 400 611 410

ME011490 MITSUBISHI

INJECTION-PUMP ASSEMBLY
4D34T1 K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-6220

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.3 3.25 3.35

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point -

Rack position 12.2

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 65 63.4 66.6

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.5+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 15.6 14.3 16.9

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(12.2)

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 65 64 66

Basic *

Fixing the lever *

Boost pressure kPa 34.7 34.7

Boost pressure mmHg 260 260

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.75

Pump speed r/min 1600 1600 1600

Average injection quantity mm3/st. 81.5 77.5 85.5

Fixing the lever *

Boost pressure kPa 34.7 34.7

Boost pressure mmHg 260 260

Injection quantity adjustment_05

Adjusting point C

Rack position R1+0.05

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 67.9 63.9 71.9

Fixing the lever *

Boost pressure kPa 34.7 34.7

Boost pressure mmHg 260 260

Injection quantity adjustment_06

Adjusting point D

Rack position R1-0.2

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 63.1 59.1 67.1

Fixing the lever *

Boost pressure kPa 34.7 34.7

Boost pressure mmHg 260 260

Injection quantity adjustment_07

Adjusting point F

Rack position R2-0.8

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 54.9 50.9 58.9

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_08

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 95 95 100

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Rack limit *

Boost compensator adjustment

Pump speed r/min 400 400 400

Rack position R2-0.8

Boost pressure kPa 6.7 5.4 8

Boost pressure mmHg 50 40 60

Boost compensator adjustment_02

Pump speed r/min 400 400 400

Rack position R2(R1+0. 05)

Boost pressure kPa 21.3 21.3 21.3

Boost pressure mmHg 160 160 160

Timer adjustment

Pump speed r/min 1150--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1100

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1600

Advance angle deg. 4.5 4 5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL
----------
T1=J04 BCL=0.8+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=40mm
----------
a=26deg+-5deg b=36deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the hole at R = aa
----------
aa=40mm
----------
a=33deg+-5deg b=40deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=11.5deg
----------
a=(130deg)