101401-1632 ZEXEL F 019 Z10 305 BOSCH INJECTION-PUMP ASSEMBLY f019z10305 1014011632


101401-1632 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 101401-1632 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 305 f019z10305
ZEXEL 101401-1632 1014011632

Service parts 101401-1632 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101040-9860
3. GOVERNOR 105921-5912
4. SUPPLY PUMP 105220-6050
5. AUTOM. ADVANCE MECHANIS 105676-0810
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5550
11. Nozzle and Holder ME016989
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105048-3501
14. NOZZLE 105017-0590
15. NOZZLE SET

Include in #1:

101401-1632 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z10 305 f019z10305
ZEXEL 101401-1632 1014011632


Zexel num
Bosch num
Firm num
Name
101401-1632 
101401-1633 
F 019 Z10 305 
   
INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-8820
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.9
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   73.9 72.3 75.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   11.2 9.9 12.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.9)
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   73.9 72.9 74.9
Basic   *
Fixing the lever   *
Boost pressure kPa   24.7 24.7
Boost pressure mmHg   185 185
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+1.8
Pump speed r/min   1600 1600 1600
Average injection quantity mm3/st.   92.5 88.5 96.5
Fixing the lever   *
Boost pressure kPa   24.7 24.7
Boost pressure mmHg   185 185
Injection quantity adjustment_05
Adjusting point   C
Rack position   (R1-1)
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   46.3 42.3 50.3
Fixing the lever   *
Boost pressure kPa   24.7 24.7
Boost pressure mmHg   185 185
Injection quantity adjustment_06
Adjusting point   D
Rack position   R2-0.65
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   35.8 31.8 39.8
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   300 300 300
Rack position   R2-0.65
Boost pressure kPa   4 2.7 5.3
Boost pressure mmHg   30 20 40
Boost compensator adjustment_02
Pump speed r/min   300 300 300
Rack position   R2(R1-0. 25)
Boost pressure kPa   11.3 11.3 11.3
Boost pressure mmHg   85 85 85
Timer adjustment
Pump speed r/min   1250--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1200
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1600
Advance angle deg.   4.5 4 5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101401-1632
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL
----------
T1=H90 BCL=0.65+-0.1mm
----------

Speed control lever angle

Test data 101401-1632
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=40mm
----------
a=26deg+-5deg b=40deg+-3deg

Stop lever angle

Test data 101401-1632
N:Engine manufacturer's normal use S:Stop the pump. (1)Use the hole at R = aa (2)Set the stopper bolt at speed = bb and rack position = cc (non-injection rack position). Confirm non-injection. (3)After setting the stopper bolt, confirm non-injection at speed dd. Rack position = ee or less (non-injection rack position). (4)- (5)Rack position corresponding to ff (6)Free (at delivery)
----------
aa=40mm bb=1600r/min cc=5-0.5mm dd=325r/min ee=(8)mm ff=16mm
----------
a=29deg+-5deg b=19deg+-5deg c=33deg+-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=1025r/min Ra=8.5+-0.1mm
----------

Timing setting

Test data 101401-1632
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(130deg)




Have questions with 101401-1632?





Group cross 101401-1632 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
9 400 613 421 
 
INJECTION-PUMP ASSEMBLY
101401-1632  

101401-1633 
F 019 Z10 305 
 
INJECTION-PUMP ASSEMBLY
F 019 Z10 306 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 633 
ME016954 
INJECTION-PUMP ASSEMBLY
4D34T4
Back to top