101401-0801 ZEXEL 9 400 613 577 BOSCH INJECTION-PUMP ASSEMBLY 9400613577 1014010801 8943329591


101401-0801 INJECTION-PUMP ASSEMBLY
Rating:
58
Buy INJECTION-PUMP ASSEMBLY 101401-0801 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 577 9400613577
ZEXEL 101401-0801 1014010801
ISUZU 8943329591 8943329591

Service parts 101401-0801 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101040-8590
3. GOVERNOR 105931-5082
4. SUPPLY PUMP 105210-6130
5. AUTOM. ADVANCE MECHANIS 105671-0030
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4321
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6(220)
13. NOZZLE-HOLDER 105048-5011
14. NOZZLE 105017-0250
15. NOZZLE SET

Include in #1:

101401-0801 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 577 9400613577
ZEXEL 101401-0801 1014010801
ISUZU 8943329591 8943329591


Zexel num
Bosch num
Firm num
Name
101401-0801 
9 400 613 577 
8943329591  ISUZU
INJECTION-PUMP ASSEMBLY
4BD12 K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.6 3.55 3.65
Rack position
After adjusting injection quantity.
  R=A
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.9
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   69.2 67.6 70.8
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.9)
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   69.2 68.2 70.2
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(11.9)
Pump speed r/min   1600 1600 1600
Average injection quantity mm3/st.   77.9 74.7 81.1
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.2
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   51.3 48.1 54.5
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   I
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   90 90 98
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1375--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1325
Advance angle deg.   0.3
Timer adjustment_03
Pump speed r/min   1575
Advance angle deg.   5 4.5 5.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101401-0801
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT (3)At delivery (at R = A, N = N1)
----------
T1=C38 N1=100r/min
----------

Speed control lever angle

Test data 101401-0801
F:Full speed I:Idle (1)Stopper bolt set position 'H' (2)Set the idle side stopper bolt at rack position = aa (at delivery).
----------
aa=R1(11.9)mm
----------
a=(3deg) b=44deg+-3deg c=2.5deg+-5deg

Stop lever angle

Test data 101401-0801
N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=40deg+-5deg

Timing setting

Test data 101401-0801
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(100deg)




Have questions with 101401-0801?





Group cross 101401-0801 ZEXEL

Isuzu 

 
8943107420 
INJECTION-PUMP ASSEMBLY
4BD1
101401-0801  
9 400 613 577 
8943329591 
INJECTION-PUMP ASSEMBLY
4BD12
9 400 613 578 
8943159180 
INJECTION-PUMP ASSEMBLY
4BD1T
9 400 613 579 
8943159190 
INJECTION-PUMP ASSEMBLY
4BD1T
9 400 613 580 
8943287690 
INJECTION-PUMP ASSEMBLY
4BD1
 
8944795760 
INJECTION-PUMP ASSEMBLY
4BG1
9 400 613 581 
8944795761 
INJECTION-PUMP ASSEMBLY
4BG1
 
8943260860 
INJECTION-PUMP ASSEMBLY
4BD1T
 
8943260861 
INJECTION-PUMP ASSEMBLY
4BD1-T
 
8943260862 
INJECTION-PUMP ASSEMBLY
4BD1-T
9 400 613 582 
8943260864 
INJECTION-PUMP ASSEMBLY
4BD1-T
 
8943263430 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 583 
8943263431 
INJECTION-PUMP ASSEMBLY
4BD1
 
8943263420 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 584 
8943263421 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 619 537 
8943263410 
INJECTION-PUMP ASSEMBLY
4BD1-T
9 400 613 585 
8943263411 
INJECTION-PUMP ASSEMBLY
4BD1-T
9 400 619 541 
8943263400 
INJECTION-PUMP ASSEMBLY
4BD1-T
9 400 613 413 
8943263401 
INJECTION-PUMP ASSEMBLY
4BD1-T
Back to top