101401-0310 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014010310 5156014261


101401-0310 INJECTION-PUMP ASSEMBLY
Rating:
50
Buy INJECTION-PUMP ASSEMBLY 101401-0310 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101401-0310 1014010310
ISUZU 5156014261 5156014261

Service parts 101401-0310 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101040-8340
3. GOVERNOR 105931-0512
4. SUPPLY PUMP 105220-4882
5. AUTOM. ADVANCE MECHANIS 105670-0020
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4582
11. Nozzle and Holder 5-15300-089-1
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105031-3952
14. NOZZLE 105015-4130
15. NOZZLE SET

Include in #1:

101401-0310 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101401-0310 1014010310
ISUZU 5156014261 5156014261


Zexel num
Bosch num
Firm num
Name
101401-0310 
101401-0311 
 
5156014261  ISUZU
INJECTION-PUMP ASSEMBLY
4BD1 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.4
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   70.5 69 72
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   290 290 290
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.4)
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   70.5 69.5 71.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.4
Pump speed r/min   1600 1600 1600
Average injection quantity mm3/st.   69.5 67.9 71.1
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.1
Pump speed r/min   1300 1300 1300
Average injection quantity mm3/st.   75.5 73.9 77.1
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   D
Rack position   R1-0.25
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   52.8 51.2 54.4
Fixing the lever   *
Injection quantity adjustment_07
Adjusting point   E
Rack position   11.5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   53.5 51.5 55.5
Fixing the lever   *
Injection quantity adjustment_08
Adjusting point   I
Rack position   R2(14.5)
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   95 95 103
Fixing the rack   *
Rack limit   *
Timer adjustment
Pump speed r/min   1350+-50
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1600
Advance angle deg.   5 4 5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101401-0310
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT: RAL
----------
T1=47 RAL=(14.5)mm
----------

Speed control lever angle

Test data 101401-0310
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=30deg+-5deg b=41deg+-3deg

Timing setting

Test data 101401-0310
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(100deg)




Have questions with 101401-0310?





Group cross 101401-0310 ZEXEL

Isuzu 

9 400 610 132 
5156013242 
INJECTION-PUMP ASSEMBLY
4BD1
101401-0310  

101401-0311 
 
5156014261 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 552 
5156014263 
INJECTION-PUMP ASSEMBLY
4BD1
 
5156007584 
INJECTION-PUMP ASSEMBLY
4BB1
 
5156014210 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 553 
5156014350 
INJECTION-PUMP ASSEMBLY
4BB1
 
5156014341 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 554 
5156014301 
INJECTION-PUMP ASSEMBLY
4BD1
 
8941310090 
INJECTION-PUMP ASSEMBLY
4BD1
 
8941310091 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 555 
8941310092 
INJECTION-PUMP ASSEMBLY
4BD1
 
8941317170 
INJECTION-PUMP ASSEMBLY
4BD1T
 
8941352210 
INJECTION-PUMP ASSEMBLY
4BB1
 
8941352211 
INJECTION-PUMP ASSEMBLY
4BB1
Back to top