Fuel injectors
  1. Home
  2. injection
  3. #1013729081

101372-9081 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1013729081 9962603201


101372-9081 INJECTION-PUMP ASSEMBLY
Rating:
55
Buy INJECTION-PUMP ASSEMBLY 101372-9081 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101372-9081 1013729081
KUBOTA 9962603201 9962603201

Service parts 101372-9081 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101037-8040
3. GOVERNOR 105400-2200
4. SUPPLY PUMP 105220-4291
5. AUTOM. ADVANCE MECHANIS 105621-0360
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-1180
11. Nozzle and Holder 996-2711-200
12. Open Pre:MPa(Kqf/cm2) 15.7{160}
13. NOZZLE-HOLDER 105041-1090
14. NOZZLE 105000-0470
15. NOZZLE SET

Include in #1:

101372-9081 as INJECTION-PUMP ASSEMBLY
108622-3153 as _

Cross reference number

ZEXEL 101372-9081 1013729081
KUBOTA 9962603201 9962603201


Zexel num
Bosch num
Firm num
Name
101372-9081 
101372-9082 
 
9962603201  KUBOTA
INJECTION-PUMP ASSEMBLY
MD15 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-3-2
Pre-stroke mm   2.4 2.35 2.45
Rack position
After adjusting injection quantity.   R=R1
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 2
Cyl.1-2 deg.   240 239.5 240.5
Injection quantity adjustment
Adjusting point   A
Rack position   R1
Pump speed r/min   1400 1400 1400
Each cylinder's injection qty mm3/st.   67.5 65.5 69.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.2+-0.5
Pump speed r/min   200 200 200
Each cylinder's injection qty mm3/st.   10 8.7 11.3
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101372-9081
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=12
----------

Speed control lever angle

Test data 101372-9081
F:Full speed I:Idle S:Stop
----------

----------
a=34deg+-5deg b=27deg+-5deg c=32deg+-3deg

Stop lever angle

Test data 101372-9081
N:Pump normal S:Stop the pump.
----------

----------
a=(25deg) b=(53deg)

Timing setting

Test data 101372-9081
(1)Pump vertical direction (2)Position of camshaft's key groove at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(110deg)




Have questions with 101372-9081?





Group cross 101372-9081 ZEXEL

101372-9060  
 
01707440 

F3L912

Mitsui 

101372-9070  
 
01707450 

F3L912
101372-9080  

101372-9082 
 
9962603200 
INJECTION-PUMP ASSEMBLY

Kubota 

101372-9081  

101372-9082 
 
9962603201 
INJECTION-PUMP ASSEMBLY
MD15
101372-9082  
 
9962603220 
INJECTION-PUMP ASSEMBLY
MD15
101372-9090  
 
9962605200 
INJECTION-PUMP ASSEMBLY
MD15
Back to top