101342-0270 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data


Information injection-pump assembly

ZEXEL 101342-0270 1013420270
ISUZU 5156009913 5156009913


Service parts 101342-0270 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101034-9041
3. GOVERNOR 105410-3970
4. SUPPLY PUMP 105220-4212
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156635-0520
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-1451
11. Nozzle and Holder 5-15300-039-1
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105081-3141
14. NOZZLE 105000-1650
15. NOZZLE SET

Include in #1:

101342-0270 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101342-0270 1013420270
ISUZU 5156009913 5156009913


Zexel num Bosch num Firm num Firm Name
101342-0270    5156009913  ISUZU INJECTION-PUMP ASSEMBLY
3AD1 * K

Calibration Data:



Adjustment conditions
Test oil   ISO4113 or {SAEJ967d}
1404 Test oil
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe mm   6-2-600
Outer diameter - inner diameter - length (mm)
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)   L
Left


Injection timing adjustment
Direction of rotation (viewed from drive side)   L
Left
Injection order   1-3-2
Pre-stroke mm   1.95 1.9 2
Beginning of injection position   NO.1
Drive side
Difference between angles 1 deg.   120 119.5 120.5
Cal 1-3
Difference between angles 2 deg.   240 239.5 240.5
Cyl.1-2


Injection quantity adjustment
Adjusting point   A
Rack position   12.6
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   38.8 37.8 39.8
Max. variation between cylinders %   0 -4 4
Fixing the rack   *


Injection quantity adjustment_02
Adjusting point   B
Rack position   12.1
Pump speed r/min   1300 1300 1300
Average injection quantity mm3/st.   41.2 40.4 42
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the rack   *


Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   450 450 450
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:



Governor adjustment

Test data 101342-0270 N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL
----------
K=16 R1=(17.5)mm
----------



Speed control lever angle

Test data 101342-0270 F:Full speed I:Idle S:Stop
----------

----------
a=27deg+-5deg b=34deg+-5deg c=32deg+-3deg



Timing setting

Test data 101342-0270 (1)Pump vertical direction (2)Position of gear mark 'Z' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(120deg)





Have questions with 101342-0270?

toggle preview




Group cross number

Isuzu 

101342-0200  9 400 619 636  5156004893  INJECTION-PUMP ASSEMBLY
3AB1
101342-0210  9 400 610 103  5156006023  INJECTION-PUMP ASSEMBLY
3AB1
101342-0220    5156004914  INJECTION-PUMP ASSEMBLY
3AB1
101342-0230    5156005950 
101342-0240    5156005961  INJECTION-PUMP ASSEMBLY
3AB1
101342-0250  9 400 610 091  5156009413  INJECTION-PUMP ASSEMBLY
3AB1
101342-0260  9 400 611 140  5156009423  INJECTION-PUMP ASSEMBLY
3AB1
101342-0270    5156009913  INJECTION-PUMP ASSEMBLY
3AD1
101342-0280      INJECTION-PUMP ASSEMBLY
3AB1
101342-0290      INJECTION-PUMP ASSEMBLY
3AB1