101242-0130 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1012420130 5156006092


101242-0130 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 101242-0130 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101242-0130 1012420130
ISUZU 5156006092 5156006092

Service parts 101242-0130 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101024-8000
3. GOVERNOR 105412-1300
4. SUPPLY PUMP 105220-4742
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156635-0620
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-1451
11. Nozzle and Holder 5-15300-039-1
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105081-3141
14. NOZZLE 105000-1650
15. NOZZLE SET

Include in #1:

101242-0130 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101242-0130 1012420130
ISUZU 5156006092 5156006092


Zexel num
Bosch num
Firm num
Name
101242-0130 
101242-0250 
 
5156006092  ISUZU
INJECTION-PUMP ASSEMBLY
2AB1 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-2
Pre-stroke mm   1.95 1.9 2
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.2
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   39 37.9 40.1
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   11.9
Pump speed r/min   1300 1300 1300
Average injection quantity mm3/st.   42.3 40.8 43.8
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   -
Rack position   8.5+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   9 7.7 10.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101242-0130
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK CAP: R1
----------
K=15 R1=(17.5)mm
----------

Speed control lever angle

Test data 101242-0130
F:Full speed I:Idle S:Stop (1)Stopper bolt setting
----------

----------
a=18.5deg+-5deg b=32.5deg+-5deg c=32deg+-3deg

Timing setting

Test data 101242-0130
(1)Pump vertical direction (2)Position of gear mark 'Z' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(120deg)




Have questions with 101242-0130?





Group cross 101242-0130 ZEXEL

Isuzu 

 
5156005441 
INJECTION-PUMP ASSEMBLY
2AB1
 
5156005252 
INJECTION-PUMP ASSEMBLY
2AB1
 
5156005311 
INJECTION-PUMP ASSEMBLY
2AB1
101242-0130  

101242-0250 
 
5156006092 
INJECTION-PUMP ASSEMBLY
2AB1
 
5156005900 

 
5156005911 
INJECTION-PUMP ASSEMBLY
2AB1
 
5156009392 
INJECTION-PUMP ASSEMBLY
2AB1
 
5156009403 
INJECTION-PUMP ASSEMBLY
2AB1
 
5156010012 
INJECTION-PUMP ASSEMBLY
2AB1
Back to top