106061-7860 ZEXEL 9 410 611 886 BOSCH FUEL-INJECTION PUMP 9410611886 1060617860


 

Information fuel-injection pump

BOSCH 9 410 611 886 9410611886
ZEXEL 106061-7860 1060617860
106061-7860 FUEL-INJECTION PUMP
Rating:
55
Buy FUEL-INJECTION PUMP 106061-7860 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 134062-3120 PUMP HOUSING
1/30. [3] 029040-6020 STUD
1/45. [1] 134311-0000 SPACER RING
1/50. [12] 134138-0000 STUD
7. [6] 134144-2620 PLUNGER-AND-BARREL ASSY
7/1. [6] 134131-1920 FLANGE BUSHING
7/2. [6] 134151-5020 PLUNGER-AND-BARREL ASSY P130
7/3. [6] 134110-2120 DELIVERY-VALVE ASSEMBLY P20
7/4. [6] 134116-4720 FITTING
7/5. [6] 139722-0400 O-RING
7/6. [6] 134117-0500 FILLER PIECE
7/7. [6] 134112-2000 COILED SPRING
7/8. [6] 134115-0100 GASKET
7/9. [6] 029302-0140 PLAIN WASHER
7/10. [6] 134135-0400 CAPSULE
7/11. [6] 029602-0010 LOCKING WASHER
7/13. [6] 139729-0400 O-RING
7/14. [6] 139715-0400 O-RING
7/15. [6] 139715-0400 O-RING
23/1. [0] 139400-0900 SHIM T0.500
23/1. [0] 139400-1000 SHIM T0.525
23/1. [0] 139400-1100 SHIM T0.550
23/1. [0] 139400-1200 SHIM T0.575
23/1. [0] 139400-1300 SHIM T0.600
23/1. [0] 139400-1400 SHIM T0.625
23/1. [0] 139400-1500 SHIM T0.650
23/1. [0] 139400-1600 SHIM T0.675
23/1. [0] 139400-1700 SHIM T0.700
23/1. [0] 139400-1800 SHIM T0.725
23/1. [0] 139400-1900 SHIM T0.750
23/1. [0] 139400-2000 SHIM T0.775
23/1. [0] 139400-2100 SHIM T0.800
23/1. [0] 139400-2200 SHIM T0.825
23/1. [0] 139400-2300 SHIM T0.850
23/1. [0] 139400-2400 SHIM T0.875
23/1. [0] 139400-2500 SHIM T0.900
23/1. [0] 139400-2600 SHIM T0.925
23/1. [0] 139400-2700 SHIM T0.950
23/1. [0] 139400-2800 SHIM T0.975
23/1. [0] 139400-2900 SHIM T1.000
23/1. [0] 139400-3000 SHIM T1.025
23/1. [0] 139400-3100 SHIM T1.050
23/1. [0] 139400-3200 SHIM T1.075
23/1. [0] 139400-3300 SHIM T1.100
23/1. [0] 139400-3400 SHIM T1.125
23/1. [0] 139400-3500 SHIM T1.150
23/1. [0] 139400-3600 SHIM T1.175
23/1. [0] 139400-3700 SHIM T1.200
23/1. [0] 139400-3800 SHIM T1.225
23/1. [0] 139400-3800 SHIM T1.225
23/1. [0] 139400-3900 SHIM T1.250
23/1. [0] 139400-4000 SHIM T1.275
23/1. [0] 139400-4100 SHIM T1.300
23/1. [0] 139400-4200 SHIM T1.325
23/1. [0] 139400-4300 SHIM T1.350
23/1. [0] 139400-4400 SHIM T1.375
23/1. [0] 139400-4500 SHIM T1.400
23/1. [0] 139400-4600 SHIM T1.425
23/1. [0] 139400-4700 SHIM T1.450
23/1. [0] 139400-4800 SHIM T1.475
23/1. [0] 139400-4900 SHIM T1.500
23/1. [0] 139400-5000 SHIM T1.525
23/1. [0] 139400-5100 SHIM T1.550
23/1. [0] 139400-5200 SHIM T1.575
23/1. [0] 139400-5300 SHIM T1.600
23/1. [0] 139400-5400 SHIM T1.625
23/1. [0] 139400-5500 SHIM T1.650
23/1. [0] 139400-5600 SHIM T1.675
23/1. [0] 139400-5700 SHIM T1.700
23/1. [0] 139400-5800 SHIM T1.725
23/1. [0] 139400-5900 SHIM T1.750
23/1. [0] 139400-6000 SHIM T1.775
23/1. [0] 139400-6100 SHIM T1.800
23/1. [0] 139400-6200 SHIM T1.825
23/1. [0] 139400-6300 SHIM T1.850
23/1. [0] 139400-6400 SHIM T1.875
23/1. [0] 139400-6500 SHIM T1.900
23/1. [0] 139400-6600 SHIM T1.925
23/1. [0] 139400-6700 SHIM T1.950
23/1. [0] 139400-6800 SHIM T1.975
24. [12] 134132-0300 PLAIN WASHER
26. [12] 013021-0040 UNION NUT M10P1.5H8
30. [2] 134001-0000 BUSHING
30. [2] 134001-0000 BUSHING
32. [1] 134256-4500 CONTROL RACK
33. [1] 024030-2030 BEARING PIN
34. [1] 134222-0000 BUSHING
41. [6] 134241-0320 CONTROL SLEEVE
43. [6] 134216-0000 SLOTTED WASHER
44. [6] 134215-0700 COILED SPRING
45. [6] 134217-0500 SLOTTED WASHER
47. [6] 134200-0420 TAPPET
47/2. [6] 134204-0100 ROLLER
47/3. [6] 134205-0000 BUSHING
47/4. [6] 134203-0000 BEARING PIN
47/5. [6] 131206-0500 SLIDER
59. [1] 016650-2230 BEARING PLATE 4T-32205(NSK)
64/1. [0] 134303-0000 SHIM D59.8&43T1.2
64/1. [0] 134303-0100 SHIM D59.8&43T1.5
64/1. [0] 134303-0200 SHIM D59.8&43T1.8
64/1. [0] 134303-0300 SHIM D59.8&43T2.0
64/1. [0] 134303-0400 SHIM D59.8&43T0.6
67. [4] 029010-6810 BLEEDER SCREW
71. [1] 134371-5700 CAMSHAFT
74. [1] 134306-0600 BEARING SHELL
75. [2] 020106-2040 BLEEDER SCREW
79. [1] 016650-2230 BEARING PLATE 4T-32205(NSK)
80. [1] 134316-1700 COVER
81. [1] 139629-0000 PACKING RING
82/1. [0] 134314-0000 SHIM T0.1
82/1. [0] 134314-0100 SHIM T0.12
82/1. [0] 134314-0200 SHIM T0.14
82/1. [0] 134314-0300 SHIM T0.16
82/1. [0] 134314-0400 SHIM T0.18
82/1. [0] 134314-0500 SHIM T0.3
82/1. [0] 134314-0600 SHIM T0.5
83. [1] 029635-5010 O-RING
84. [1] 134563-0900 SLIDING PIECE
85. [1] 134043-0800 COVER
86. [1] 134042-1400 GASKET
87. [12] 012206-1640 FLAT-HEAD SCREW
88. [1] 134045-0100 CAPSULE
89. [1] 026524-2940 GASKET
93. [3] 139206-0400 UNION NUT
95. [1] 131041-0800 GASKET
96. [6] 134047-0000 CAPSULE
98. [1] 029470-5010 WOODRUFF KEY
118. [1] 134496-0300 POINTER
119. [2] 020006-1240 BLEEDER SCREW
132. [1] 134430-3520 EYE BOLT
133. [2] 029341-4130 GASKET
142. [1] 029731-0120 EYE BOLT
143. [2] 029341-0110 GASKET
152. [1] 029731-4680 EYE BOLT
153. [2] 029341-4130 GASKET
162. [1] 131424-1520 OVER FLOW VALVE
163. [2] 029341-4130 GASKET

Include in #1:

106671-4990 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
106061-7860 
9 410 611 886 
NP-PE6P120/321LS3S 
   
FUEL-INJECTION PUMP
Q




Information:

Bolts And Bolt Torque
A bolt which is too long may "bottom" before the head is tight against the part it is to hold. The threads can be damaged when a "long" bolt is removed.If a bolt is too short, there may not be enough threads engaged to hold the part securely.Apply proper torque values to all bolts and nuts when assembling Caterpillar equipment. When a specific torque value is required, the value is listed in the SPECIFICATIONS section of the Service Manual. Tighten all other bolts and nuts for general usage, hydraulic valve bodies, or taperlock studs to the torque values given in the torque charts.T-T-T Procedure
A torque-turn-tighten (T-T-T) procedure is used in many specifications and instructions.1. Clean the bolt and nut threads.2. Put lubricant on the threads and the seat face of the bolt and the nut.3. Turn the bolt or the nut tight according to the torque specification.4. Put a location mark on the part and on the bolt or the nut.5. Turn the bolt or the nut tighter the amount of degrees according to the specifications. The side of a nut or bolt head can be used for reference if a mark can not be put on. Torque Wrench Extension
When a torque wrench extension is used with a torque wrench, the torque indication on the torque wrench will be less than the real torque.
TORQUE WRENCH WITH TORQUE WRENCH EXTENSION
E: Torque wrench drive axis-to-torque wrench extension drive axis. W: Mark on handle-to-torque wrench drive axis.1. Put a mark on the handle. Measure the handle from the mark to the axis of the torque wrench drive (W).2. Measure the torque wrench extension from the torque wrench drive to the axis of the torque wrench extension drive (E).3. To get correct torque indication (TI) when the real torque (RT) is known: Example: W = 12 in. (304.8 mm); E = 2.56 in. (65.0 mm); RT (from specifications) = 125 lb. ft. (170 N m). 4. Hold the torque wrench handle with the longest finger of the hand over the mark on the handle to get the real torque (RT) with low torque indication (TI) on the torque wrench.Locks
Flat metal locks must be installed properly to be effective. Bend one end of the lock around the edge of the part. Bend the other end against one flat surface of the nut or bolt head.Always install new locks in compartments which house moving parts.If lockwashers are installed on housings made of aluminum, use a flat washer between the lockwasher and the housing. Lines And Wires
When removing or disconnecting a group of lines or wires, tag each one to assure proper assembly.Lubrication
Where applicable, fill the compartments of the components serviced with the amount, type and grade of lubricant recommended in the Lubrication and Maintenance Guide.Rust Preventive Compound
Clean the rust preventive compound from all machined surfaces of new parts before installing them.Shims
When shims are removed, tie them together and identify them as to location. Keep shims clean and flat until they are

Have questions with 106061-7860?





Group cross 106061-7860 ZEXEL

9 410 613 665 
NP-PE6P120/321LS3S 
 
FUEL-INJECTION PUMP
9 410 610 806 
 
FUEL-INJECTION PUMP
9 410 614 511 
NP-PE6P120/321LS3000 
 
FUEL-INJECTION PUMP
9 410 611 807 
 
FUEL-INJECTION PUMP
9 410 614 512 
NP-PE6P120/321LS3000 
 
FUEL-INJECTION PUMP

Mitsubishi 

9 410 611 210 
NP-PE6P120/721RS3000 
ME730916 
FUEL-INJECTION PUMP
9 410 610 314 
NP-PE6P120/720RS3000 
 
FUEL-INJECTION PUMP
9 410 612 013 
NP-PE6P120/321LS3S 
 
FUEL-INJECTION PUMP
106061-7860  
9 410 611 886 
NP-PE6P120/321LS3S 
 
FUEL-INJECTION PUMP

Mitsubishi 

9 410 611 211 
NP-PE6P120/721RS3000 
ME731663 
FUEL-INJECTION PUMP

Hino 

9 410 612 014 
NP-PE6P120/321LS3S 
221004130A 
FUEL-INJECTION PUMP
9 410 611 427 
NP-PE6P120/721RS3000 
 
FUEL-INJECTION PUMP
Back to top