106871-9101 ZEXEL Calibration Data 1068719101

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy None 106871-9101 zexel genuine, new aftermarket engine parts with delivery

Information

ZEXEL 106871-9101 1068719101

Service parts 106871-9101 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106080-5610

3. GOVERNOR 105489-4610

4. SUPPLY PUMP 105237-4590

5. AUTOM. ADVANCE MECHANIS 105681-1360

6. COUPLING PLATE 105664-2090

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-7660

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/24.5{250}

13. NOZZLE-HOLDER 105031-7230

14. NOZZLE

105015-7620

15. NOZZLE SET

Include in #1:

106871-9101 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106871-9101 1068719101

Zexel num

Bosch num

Firm num

Name

106871-9101

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-0820

Overflow valve opening pressure kPa 127 107 147

Overflow valve opening pressure kgf/cm2 1.3 1.1 1.5

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-8-6-2- 7-5-4-3

Pre-stroke mm 4.8 4.74 4.8

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-8 deg. 45 44.75 45.25

Difference between angles 2
Cal 1-6 deg. 90 89.75 90.25

Difference between angles 3
Cyl.1-2 deg. 135 134.75 135.25

Difference between angles 4
Cal 1-7 deg. 180 179.75 180.25

Difference between angles 5
Cal 1-5 deg. 225 224.75 225.25

Difference between angles 6
Cal 1-4 deg. 270 269.75 270.25

Difference between angles 7
Cal 1-3 deg. 315 314.75 315.25

Injection quantity adjustment

Adjusting point A

Rack position 9.5

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 143.6 141.6 145.6

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 9.8

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 141.1 138.1 144.1

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_03

Adjusting point C

Rack position 9.6

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 143.4 140.4 146.4

Fixing the lever *

Injection quantity adjustment_04

Adjusting point D

Rack position 9.5

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 148.5 142.5 154.5

Fixing the lever *

Injection quantity adjustment_05

Adjusting point E

Rack position 9.1

Pump speed r/min 1200 1200 1200

Average injection quantity mm3/st. 123.4 117.4 129.4

Fixing the lever *

Injection quantity adjustment_06

Adjusting point F

Rack position 4.2+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 9.6 6.6 12.6

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Timer adjustment

Pump speed r/min 900

Advance angle deg. 1.7 1.4 2

Load 3/4

Timer adjustment_02

Pump speed r/min 1060

Advance angle deg. 4.75 4.45 5.05

Load 4/4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Excess fuel setting for starting: SXL (5)Set the damper spring (after setting the idle spring).
----------
RT=0.8 TH=2.7mm SXL=10.1+-0.1mm
----------