106671-4762 ZEXEL 9 400 611 165 BOSCH INJECTION-PUMP ASSEMBLY 9400611165 1066714762 65111017229

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-4762 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 165 9400611165

ZEXEL 106671-4762 1066714762

DAEWOO 65111017229 65111017229

Cross reference number

BOSCH 9 400 611 165 9400611165

ZEXEL 106671-4762 1066714762

DAEWOO 65111017229 65111017229

Zexel num

Bosch num

Firm num

Name

106671-4762

9 400 611 165

65111017229 DAEWOO

INJECTION-PUMP ASSEMBLY
D2366T * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-4420

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.7 4.65 4.75

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.2

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 144.7 142.7 146.7

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 10.85

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 150.6 147.6 153.6

Fixing the lever *

Injection quantity adjustment_03

Adjusting point D

Rack position 4.8+-0.5

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 15.5 14 17

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Timer adjustment

Pump speed r/min -

Advance angle deg. 0 0 0

Remarks
Measure speed (beginning of operation).

Timer adjustment_02

Pump speed r/min -

Advance angle deg. 3 3 3

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Microswitch adjustment unnecessary. (3)Excess fuel setting for starting: SXL (N = N1) (4)Damper spring setting
----------
SXL=11.05+-0.1mm N1=300r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(9deg)+-5deg b=(18deg)+-5deg

0000000901

F:Full load
----------

----------
a=16deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=64deg+-5deg

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position for the No. 6 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)